Wednesday, October 16, 2013
New Software version 1.07
Enhancements & Fixes:
- Updated Material Profiles - version 7 - Enhancements to part quality for ABS and PLA
- Fix bug where Print Jet 1 was always used for drawing the internal hatch structure in features that should be using Print Jet 2 or Print Jet 3.
- There have been instances where the "Build" button on the "Build" dialogue is not available. The
"Build" dialogue is now resizeable so that the "Build" button is accessible.
Note: If you get an message "you do not have privileges to install etc....." during the install, try the install again by right clicking on the setup.exe file and select "Run as administrator".
Installation Instructions:
- Uninstall previous installation of CubeX Software.
- Extract the cubex_software_win.zip folder
- Double click on setup.exe to begin installation
- The installer will direct thru the install process
- after installation complete, a CubeX Shortcut will be placed on the Desktop
Link to download new software version:
http://cubify.com/resource.aspx?link_id=14
Friday, October 4, 2013
Another new Software version: 1.06
Software version 1.06 just got released, shortly after the 1.05 release. - SEE NOTE below !
NOTE: Maybe you want to wait downloading this version there might be a bug that can cause a filament flow error.
I am getting a bad printfile when using jet 2 or jet 3.
See Release notes for changes.
Release notes:
Software 1.06 Release notes PDF
CubeX Maintainance document:
CubeX Maintainance check PDF
(Note: If you get an message "you do not have privileges to install etc....." during the install, try the install again by right clicking on the setup.exe file and select "Run as administrator".
Installation Instructions:
- Uninstall previous installation of CubeX Software.
- Extract the cubex_software_win.zip folder
- Double click on setup.exe to begin installation
- The installer will direct thru the install process
- after installation complete, a CubeX Shortcut will be placed on the Desktop
Link to download new software version:
http://cubify.com/resource.aspx?link_id=14
NOTE: Maybe you want to wait downloading this version there might be a bug that can cause a filament flow error.
I am getting a bad printfile when using jet 2 or jet 3.
See Release notes for changes.
Release notes:
Software 1.06 Release notes PDF
CubeX Maintainance document:
CubeX Maintainance check PDF
(Note: If you get an message "you do not have privileges to install etc....." during the install, try the install again by right clicking on the setup.exe file and select "Run as administrator".
Installation Instructions:
- Uninstall previous installation of CubeX Software.
- Extract the cubex_software_win.zip folder
- Double click on setup.exe to begin installation
- The installer will direct thru the install process
- after installation complete, a CubeX Shortcut will be placed on the Desktop
Link to download new software version:
http://cubify.com/resource.aspx?link_id=14
Subscribe to:
Posts (Atom)