Tuesday, May 21, 2013

Dimension accuracy of parts and features - see post above

I am printing out some test parts to see how accurate holes, cylinders, wall and part sizes are.

4 comments:

  1. Can't wait to read that!!

    Thank's again!

    ReplyDelete
  2. Especially looking forward to seeing your results. I'm interested in printing small gears and need to know just how accurate I can get them. Thanks for a great blog!

    ReplyDelete
  3. Can't wait. I have the original cube which has an issue with printing inner dimensions on models to small. Try printing a hallow cylinder or tube, on the original cube the outer surface diameter is quite accurate within 0.1 to 0.2 mm, while the inner diameter will be over 1.5 mm off.

    ReplyDelete
  4. Dimensional accuracy test Part 1 (small parts and features) is posted.

    ReplyDelete

Note: Only a member of this blog may post a comment.